Thursday, April 28, 2011
Wednesday, April 27, 2011
Friday, April 22, 2011
Db D1:10 Drift challenge track of the past
The main sweeper of Db D1:10 Drift challenge II 2010
No straight lines on the 'S' Chicane before the overhead sweeper where you gotta slide sideways on it to avoid point deduction. Successful sideways drifting on the overhead sweeper will give extra points!

Consisting of very tight technical corners on very hard compound tyre DS F2 on tiles, the track consist of a long sweeper headind to the overhead bridge while moving down the bridge it will head towards the quater pipe turn and below the overhead bridge a sharp u-turn which makes visibility to slide around it needs precise timing and line.
Tuesday, April 19, 2011
Db RT CS 180SX
Silver 180sx- Aboyakuza TRF415MSXX MRE (CS2.4)
White 180sx- Masta R4ZorZ Yokomo MR4TC-SD (CS2.0)
Yellow 180sx- Akudou Tamiya TA0-VDF (CS2.4)
Thursday, April 14, 2011
VDF CS Ratio from 2.1 to 2.4
Front Pulley: 41T Square
Rear Pulley: Square 30T
Center: Front Square 12T/Rear 21T
Cs Ratio:2.4 still on stock vdf's belting
Tuesday, April 12, 2011
Video of Aboyazuka on CS action
Aboyakuza CS2.043 on a VDF with his Bright Silver Koguchi Starspec 180sx
President Aboyakuza going insane on CS3 plus above
DbRT President 'Aboyakuza' decide to go for the insanely high ratio cs on his TRF415MSXX Marc Reinhard edition. Utilising the pulleys which is 38(F)/16(FC) and 22T(R)/38(RC), his ratio from 2.37 to 3.45!! From his comment, it takes real control and set up of the cambers,ride height etc to mantain it to countersteer properly. However at long sliders, he has the advantage over the lower cs but will spin too much on the rear out of the corners. Front belting maintain while rear is using the X-ray belting. Going against the other chassis with the same ration would be great but advantages still hold on as his 2.37 is miraculosly easy to control. DIY! Way to go Aboyakuza!
Friday, April 1, 2011
Subscribe to:
Posts (Atom)






















